#VLIDIY I redesigned my bed to make it stronger and the frame lower profile to get more headroom and more space under for storage and outside kitchen drawer.
Since I chose to have the 2x4' flat and using 4" screws, I drilled a pilot hole with a 1/2" paddle bit about half way through to get a good bite on the connecting piece. You'll need a longer screw bit though or an extension. If using an extension you will need to go to a wider paddle bit
So good to see riders still in reasonably high spirits after a day where decribing it as challenging would be a rather large understatement.
@remigauvinmtb all smiles and thankful it was over.